K.T. Tan's Research Group

Conference Publications/Presentations

* denote students in K.T. Tan’s Research Group

  1. M. Fikry*, V. Vinogradov, K.T. Tan, S. Ogihara (2024). Stress-Based Analysis using an Extended Variational Approach for Composite Laminates with Alternating Material Properties in the Loading Direction, Conference Proceeding for American Society for Composites 39th Technical Conference, 21-24 Oct, San Diego, California, USA.
  2. J.P. Mack*, A. Kovac*, F. Mirza*, Z.H. Duan, S. Hasebe, R. Higuchi, T. Yokozeki and K.T. Tan (2024). Data-Driven Approaches for Assessing Compression After Low-Velocity Impact in Carbon Fiber Reinforced Composites, Conference Proceeding for American Society for Composites 39th Technical Conference, 21-24 Oct, San Diego, California, USA.
  3. I.W. Sluder*, A. Frankowski* and K.T. Tan (2024). Hygroscopicity of 3D Printed Carbon Fiber Reinforced Polymeric Composites, Conference Proceeding for American Society for Composites 39th Technical Conference, 21-24 Oct, San Diego, California, USA.
  4. F. Mirza*, J.P. Mack*, Z.H. Duan and K.T. Tan (2024). A Machine Learning Approach for Predicting Bending After Impact Strength and Failure Modes in Hybrid (CFRP/GFRP) Sandwich Composites, Conference Proceeding for American Society for Composites 39th Technical Conference, 21-24 Oct, San Diego, California, USA.
  5. A.M. Holland*, J. Mack*, F. Mirza*, V.B.C. Tan, T.E. Tay and K.T. Tan (2024). Investigating the Low-Velocity Impact Resistance of Helicoidal and Double Double 3D Printed Carbon Fiber Reinforced Polymer Layups, Conference Proceeding for American Society for Composites 39th Technical Conference, 21-24 Oct, San Diego, California, USA.
  6. A. Frankowski*, I. Sluder* and K.T. Tan (2024). Mechanical Recycling of 3D Printed Carbon Fiber Reinforced Composites for Increased Sustainability Through a Reduction of Waste Material, Conference Proceeding for American Society for Composites 39th Technical Conference, 21-24 Oct, San Diego, California, USA.
  7. F. Mirza*, J.P. Mack*, Z.H. Duan and K.T. Tan (2024). Enhancing Aerospace Composite Structures: Predicting Post-Impact Performance with Machine Learning, Poster Presentation for 2024 Glenn Space Technology Symposium, 15-17 Jul, Cleveland, Ohio, USA.
  8. J.P. Mack* and K.T. Tan (2024). Data-Driven Approaches for Assessing Compression After Low-Velocity Impact in Carbon Fiber Reinforced Composites, Poster Presentation for 2024 Glenn Space Technology Symposium, 15-17 Jul, Cleveland, Ohio, USA.
  9. J.P. Mack* and K.T. Tan (2024). Machine Learning Applications for Compression Strength After Low Velocity Impacted Carbon Fiber Composites, Conference Proceeding for 2024 AIAA Region III Student Conference, 5-6 April, Akron, Ohio, USA.
  10. P.M. Curtis*, A.P. Frankowski* and K.T. Tan (2024). 3D Printed Carbon Fiber Reinforced Polymeric Composites in Tension, Conference Proceeding for 2024 AIAA Region III Student Conference, 5-6 April, Akron, Ohio, USA.
  11. A.P. Frankowski*, I. Sluder* and K.T. Tan (2024). Characterizing the IZOD Impact Strength of a 3D Printed Reinforced Carbon Fiber Composite Material with Varying Layup Orientations, Conference Proceeding for 2024 AIAA Region III Student Conference, 5-6 April, Akron, Ohio, USA.
  12. A.P. Kovac* and K.T. Tan (2024). Predicting Low Velocity Impact Damage of Laminated Composites using Artificial Neural Network Machine Learning Models, Conference Proceeding for 2024 AIAA Region III Student Conference, 5-6 April, Akron, Ohio, USA.
  13. I.W. Sluder*, P. Curtis* and K.T. Tan (2024). Curved Fiber Patterns in 3D-Printed Carbon Fiber Composites: A Flexural Study, Conference Proceeding for 2024 AIAA Region III Student Conference, 5-6 April, Akron, Ohio, USA.
  14. K.T. Tan (2023). Predicting Failure in Composite Structures using Data-Driven Modeling Approach, Conference Presentation for ASME 2023 International Mechanical Engineering Congress & Exposition (IMECE) Conference, 29 Oct – 2 Nov, New Orleans, Louisiana, USA.
  15. J.P. Mack*, F. Mirza*, A. Banik*, M.H. Khan* and K.T. Tan (2023). Impact Damage and Failure Mechanisms of Hybrid Facesheet Sandwich Composites under Low Temperature Conditions, Conference Proceeding for American Society for Composites 38th Technical Conference, 17-20 Sept, Greater Boston, Massachusetts, USA.
  16. J.P. Mack* and K.T. Tan (2023). Equi-Energetic Low-Velocity Impact Effects on the Compression After Impact Strength of Carbon Fiber Composite Tube Structures, Conference Proceeding for American Society for Composites 38th Technical Conference, 17-20 Sept, Greater Boston, Massachusetts, USA.
  17. F. Mirza*, J.P. Mack*, A. Banik*, M.H. Khan* and K.T. Tan (2023). Investigation of Bending After Impact Failure Behavior in Foam-Core Hybrid Sandwich Composites at Extreme Low Temperature, Conference Proceeding for American Society for Composites 38th Technical Conference, 17-20 Sept, Greater Boston, Massachusetts, USA.
  18. I. Kaiser*, R. Ferguson and K.T. Tan (2023). Effect of Surface Preparation on the Damage and Fracture Behavior of Carbon Fiber-Reinforced Polymer and Titanium Tubular Adhesive Lap-Joints, Conference Proceeding for American Society for Composites 38th Technical Conference, 17-20 Sept, Greater Boston, Massachusetts, USA.
  19. K.T. Tan (2022). Effect of Arctic Temperature on Damage of Foam-Core Sandwich Composites, Conference Presentation for ASME 2022 International Mechanical Engineering Congress & Exposition (IMECE) Conference, 30 Oct-3 Nov, Columbus, Ohio, USA.
  20. A. Banik* and K.T. Tan (2022). Impact Performance of Bioinspired 3D Printed Composite, Conference Presentation for ASME 2022 International Mechanical Engineering Congress & Exposition (IMECE) Conference, 30 Oct-3 Nov, Columbus, Ohio, USA.
  21. K.T. Tan, A. Banik* and M.H. Khan* (2022). Impact Damage Response and Mechanisms of Hybrid Composite Facesheet Foam Core Sandwich Structures in Arctic Conditions, Conference Proceeding for 13th International Conference on Sandwich Structures, ICSS-13, 23-26 Oct, Knoxville, Tennessee, USA.
  22. I. Kaiser*, N. Richards* and K.T. Tan (2022). Machine Learning for Strength and Damage Prediction of Adhesive Joints, Conference Proceeding for American Society for Composites 37th Technical Conference, 19-21 Sept, Tucson, Arizona, USA.
  23. A. Banik*, M.H. Khan* and K.T. Tan (2022). Impact Performance Comparison of Fiber Reinforced Composite Sandwich Structures in Arctic Condition, Conference Proceeding for American Society for Composites 37th Technical Conference, 19-21 Sept, Tucson, Arizona, USA.
  24. J. Sychla* and K.T. Tan (2022). Investigating Effects of Fiber Layers in 3D Printed Carbon Fiber Reinforced Polymer Composites, Conference Proceeding for American Society for Composites 37th Technical Conference, 19-21 Sept, Tucson, Arizona, USA.
  25. A. Banik*, M.H. Khan* and K.T. Tan (2022). Effect of Ice Shape on Low Velocity Impacts of CFRP Sandwich Composites, Conference Proceeding for Annual Conference and Exposition on Experimental and Applied Mechanics Virtual Conference, SEM 2022, 13-16 Jun, Pittsburgh, Pennsylvania, USA.
  26. A. Banik* and K.T. Tan (2021). Impact Performance and Bending Behavior Analysis of Fiber Reinforced Composite Sandwich Structures in Arctic Condition, Conference Presentation for ASME 2021 International Mechanical Engineering Congress & Exposition (IMECE) Virtual Conference, 1-4 Nov, Virtual Conference, Online.
  27. I. Kaiser* and K.T. Tan (2021). Surface Characterization of CFRP and Titanium Tubular Adhesive Lap-Joints at Elevated Temperatures, Conference Presentation for ASME 2021 International Mechanical Engineering Congress & Exposition (IMECE) Virtual Conference, 1-4 Nov, Virtual Conference, Online.
  28. J. Sychla*, C. Zhang* and K.T. Tan (2021). Analysis of Printing Parameters in 3D Printed Carbon Fiber Composites using Design of Experiments, Conference Proceeding for American Society for Composites 36th Technical Conference (Virtual), 19-23 Sept, College Station, Texas, USA.
  29. A. Banik*, C. Zhang* and K.T. Tan (2021). Effect of Impactor Mass on CFRP in Arctic Condition under Low-Velocity Impact, Conference Proceeding for American Society for Composites 36th Technical Conference (Virtual), 19-23 Sept, College Station, Texas, USA.
  30. I. Kaiser*, C. Zhang* and K.T. Tan (2021). Failure of CFRP and Titanium Tubular Adhesive Lap Joints at Extreme Temperatures, Conference Proceeding for American Society for Composites 36th Technical Conference (Virtual), 19-23 Sept, College Station, Texas, USA.
  31. C. Zhang*, I. Kaiser* and K.T. Tan (2021). Numerical Model of Tubular Composite Sandwich Structures under Low-Velocity Impact, Conference Proceeding for American Society for Composites 36th Technical Conference (Virtual), 19-23 Sept, College Station, Texas, USA.
  32. S. Oshima, T. Ogasawara and K.T. Tan (2021). Stress Concentration Reduction in Adhesively Bonded Joints Using Mechanical Metamaterials, Conference Proceeding for 63rd JSASS/JSME/JAXA Structures Conference (Virtual), 4-6 Aug, Japan.
  33. A. Banik* and K.T. Tan (2021). Effect of Equal Energy Impact on CFRP in Arctic Conditions, Conference Proceeding for Annual Conference and Exposition on Experimental and Applied Mechanics Virtual Conference, SEM 2021, 14-17 Jun, Albuquerque, New Mexico, USA.
  34. K.T. Tan (2020). Fracture Mechanics Model for Compression-After-Impact and Bending-After-Impact Strength of Composites, Conference Presentation for ASME 2020 International Mechanical Engineering Congress & Exposition (IMECE) Virtual Conference, 13-19 Nov, Portland, Oregon, USA.
  35. C. Zhang* and K.T. Tan (2020). Numerical Model of Tubular Composite Sandwich Structures under Low-Velocity Impact, Conference Presentation for ASME 2020 International Mechanical Engineering Congress & Exposition (IMECE) Virtual Conference, 13-19 Nov, Portland, Oregon, USA.
  36. A. Banik* and K.T. Tan (2020). Low Mass-High Velocity and High Mass-Low Velocity Impact Testing on CFRP Specimen under Equal Impact Energy, Conference Presentation for ASME 2020 International Mechanical Engineering Congress & Exposition (IMECE) Virtual Conference, 13-19 Nov, Portland, Oregon, USA.
  37. I. Kaiser* and K.T. Tan (2020). Fracture Behavior and Damage of CFRP and Titanium Tubular Adhesive Lap-Joints at Elevated Temperatures, Conference Presentation for ASME 2020 International Mechanical Engineering Congress & Exposition (IMECE) Virtual Conference, 13-19 Nov, Portland, Oregon, USA.
  38. K.T. Tan (2020). Understanding Post-Impact Compressive/Bending Performance of Composites using Linear Elastic Fracture Mechanics Model, Conference Proceeding for American Society for Composites 35th Technical Conference (Virtual), 14-17 Sept, Jersey City, New Jersey, USA.
  39. C. Zhang* and K.T. Tan (2020). Experimental and Numerical Investigation of Large Scale Effect on Buckling and Post-Buckling Behavior of Tubular Structures, Conference Proceeding for American Society for Composites 35th Technical Conference (Virtual), 14-17 Sept, Jersey City, New Jersey, USA.
  40. A. Banik* and K.T. Tan (2020). Low Velocity Impact Testing of Ice on Steel and Composite Specimen, Conference Proceeding for American Society for Composites 35th Technical Conference (Virtual), 14-17 Sept, Jersey City, New Jersey, USA.
  41. I. Kaiser* and K.T. Tan (2020). Gecko Inspired Adhesive Patterned Single Lap Joints, Conference Proceeding for American Society for Composites 35th Technical Conference (Virtual), 14-17 Sept, Jersey City, New Jersey, USA.
  42. K.T. Tan and M.H. Khan* (2019). Impact and After-Impact Performance of Composite Sandwich Structures in Extreme Environment, Conference Presentation for ASME 2019 International Mechanical Engineering Congress & Exposition (IMECE), 8-14 Nov, Salt Lake City, Utah, USA.
  43. I. Kaiser* and K.T. Tan (2019). Damage Analysis of Carbon Fiber Reinforced Polymer and Titanium Adhesive Joints, Conference Proceeding for American Society for Composites 34th Technical Conference, 23-25 Sept, Atlanta, Georgia, USA.
  44. C. Zhang* and K.T. Tan (2019). Low-Velocity Impact Response and Compression After Impact Behavior of Non-Planar Composites Sandwich Structures, Conference Proceeding for American Society for Composites 34th Technical Conference, 23-25 Sept, Atlanta, Georgia, USA.
  45. M.H. Khan* and K.T. Tan (2019). Post-Impact Flexural Collapse of Composite Sandwich Structures in Low Temperature Arctic Conditions, Conference Proceeding for American Society for Composites 34th Technical Conference, 23-25 Sept, Atlanta, Georgia, USA.
  46. B. Li*, S. Alamri* and K.T. Tan (2019). Asymmetric Elastic-Wave Transmission in Metacomposite Structures, Conference Proceeding for 22nd International Conference on Composite Materials, ICCM-22, 11-16 Aug, Melbourne, Australia.
  47. M.H. Khan* and K.T. Tan (2019). Understanding Effect of Arctic Temperature on Post-Impact Flexural Strength of Composites, Conference Proceeding for 22nd International Conference on Composite Materials, ICCM-22, 11-16 Aug, Melbourne, Australia.
  48. S. Alamri*, B. Li* and K.T. Tan (2019). Asymmetric Wave Transmission in Dissipative Acoustic Metamaterials, Conference Presentation for 10th International Conference on Metamaterials, Photonic Crystals and Plasmonics (META2019), 23-26 Jul, Lisbon, Portugal.
  49. B. Li*, Z. Li, J. Christensen and K.T. Tan (2019). Elastic Wave Control in Double-Zero-Index Elastic Metamaterials, Conference Presentation for 10th International Conference on Metamaterials, Photonic Crystals and Plasmonics (META2019), 23-26 Jul, Lisbon, Portugal.
  50. K.T. Tan (2019). Modeling Advanced Metacomposites: Structural and Functional Applications, Conference Presentation for 10th International Conference on Materials for Advanced Technologies (ICMAT 2019), 23-28 Jun, Singapore.
  51. K.T. Tan and M.H. Khan* (2018). Effect of Low Temperature Arctic Conditions on Impact and Post-Impact Mechanisms of Composite Sandwich Structures, Conference Presentation for ASME 2018 International Mechanical Engineering Congress & Exposition (IMECE), 9-15 Nov, Pittsburgh, Pennsylvania, USA.
  52. K.T. Tan and M.H. Khan* (2018). Impact Performance and Flexural Behavior of Composite Sandwich Structures in Low Temperature Arctic Conditions, Conference Proceeding for American Society for Composites 33rd Technical Conference, 24-26 Sept, Seattle, Washington, USA.
  53. K.T. Tan and M.H. Khan* (2018). Impact and Post-Impact Flexural Behavior of Composite Sandwich Structures in Extreme Low Temperature Arctic Conditions, Conference Proceeding for 12th International Conference on Sandwich Structures, ICSS-12, 19-22 Aug, Lausanne, Switzerland.
  54. M. Elamin*, B. Li* and K.T. Tan (2018). Effect of Low Temperature on the Post-Impact Compression Response of Composite Sandwich Structures, Conference Proceeding for 18th European Conference on Composite Materials, ECCM-18, 25-28 Jun, Athens, Greece.
  55. K.T. Tan and M.H. Khan* (2018). Impact and Flexural Performance of Composite Sandwich Structures in Low Temperature Arctic Conditions, Conference Presentation for International Symposium on Dynamic Response and Failure of Composite Materials (DRaF 2018), 12-15 Jun, Ischia, Naples, Italy.
  56. M. Jaberzadeh*, B. Li* and K.T. Tan (2018). On the Behavior of Acoustic/Elastic Metamaterials with Anisotropic Mass Density, Conference Presentation for the 175th Acoustical Society of America (ASA) Spring Meeting, 7-11 May, Minneapolis, Minnesota, USA.
  57. B. Li*, S. Alamri* and K.T. Tan (2018). Broadband Asymmetric Wave Transmission in Dissipative Acoustic/Elastic Metamaterials with Diatomic Oscillators, Conference Presentation for the 175th Acoustical Society of America (ASA) Spring Meeting, 7-11 May, Minneapolis, Minnesota, USA.
  58. S. Alamri*, B. Li* and K.T. Tan (2018). Impact Wave Attenuation using Maxwell-Type Oscillators in Dissipative Elastic Metamaterials, Conference Presentation for the 175th Acoustical Society of America (ASA) Spring Meeting, 7-11 May, Minneapolis, Minnesota, USA.
  59. C. Rice* and K.T. Tan (2018). Fracture Testing a Horse Hoof Inspired Biomimetic Structure, Conference Presentation for E-Fest East Old Guard Oral Competition, 14 Apr, Penn State University, Pennsylvania, USA.
  60. M.H. Khan* and K.T. Tan (2018). Evaluation of Low Temperature Effects on Impact and Bending Properties of Composite Sandwich Structures, Conference Proceeding for ASCE Earth and Space Conference, 9-12 Apr, Cleveland, Ohio, USA.
  61. K.T. Tan, M. Elamin* and B. Li* (2017). Impact Damage Mechanisms of Composite Sandwich Structures in Arctic Condition, Conference Presentation for ASME 2017 International Mechanical Engineering Congress & Exposition (IMECE), 3-9 Nov, Tampa, Florida, USA.
  62. K.T. Tan, M. Elamin* and B. Li* (2017). Impact Performance and Damage Behavior of Composite Sandwich Structures in Arctic Condition, Conference Proceeding for American Society for Composites 32nd Technical Conference, 22-25 Oct, Purdue University, West Lafayette, Indiana, USA.
  63. M. Elamin*, B. Li* and K.T. Tan (2017). Effect of Low Temperature on Impact Behavior of Composite Sandwich Structures, Conference Proceeding for 21st International Conference on Composite Materials, ICCM-21, 20-25 Aug, Xi-An, China.
  64. K.T. Tan, M. Elamin* and B. Li* (2017). Impact Damage of Composite Sandwich Structures in Arctic Condition, Conference Proceeding for 2nd SEA-Japan Conference on Composite Materials (2nd SEA-JCCM), 6-9 Aug, Tokyo, Japan.
  65. B. Li*, K.T. Tan and J. Christensen (2017). Investigation of Locally Resonant Nanophononic Metamaterials with Ultralow Thermal Conductivity, Conference Proceeding for 8th International Conference on Metamaterials, Photonic Crystals and Plasmonics (META2017), 25-28 Jul, Incheon, South Korea.
  66. K.T. Tan, M. Elamin* and B. Li* (2017). Impact Behavior of Composite Sandwich Structures in Arctic Condition, Conference Presentation for ASME 36th International Conference on Ocean, Offshore & Arctic Engineering (OMAE), 25-30 Jun, Trondheim, Norway.
  67. K.T. Tan (2017). Modeling Advanced Metacomposites: Unique Control of Stress Wave Propagation, 9th International Conference on Materials for Advanced Technologies (ICMAT 2017), 18-23 Jun, Singapore.
  68. K.T. Tan, B. Li* and M.H. Khan* (2017). Acoustic/Elastic Metamaterials: A Novel Solution to Impact Problems, Conference Proceeding for PHONONICS 2017: 4th International Conference on Phononic Crystals/Metamaterials, Phonon Transport/Coupling and Topological Phononics, 4-9 Jun, Changsha, China.
  69. B. Li*, S. Alamri* and K.T. Tan (2017). Control of Asymmetric Wave Transmission in Multiple Frequency Bands Using Elastic Metamaterials, Conference Proceeding for PHONONICS 2017: 4th International Conference on Phononic Crystals/Metamaterials, Phonon Transport/Coupling and Topological Phononics, 4-9 Jun, Changsha, China.
  70. K.T. Tan and B. Li* (2016). Unidirectional Wave Transmission in a Diatomic Acoustic Metamaterial, Conference Proceeding for the 5th Joint Meeting of the Acoustical Society of America (ASA) and the Acoustical Society of Japan (ASJ), 28 Nov-2 Dec, Honolulu, Hawaii, USA.
  71. M. Jaberzadeh*, B. Li* and K.T. Tan, (2016). Numerical Analysis of Wave Motion Through Acoustic/Elastic Metamaterial with Anisotropic Effective Mass Density, Conference Proceeding for ASME 2016 International Mechanical Engineering Congress & Exposition (IMECE), 11-17 Nov, Phoenix, Arizona, USA.
  72. K.T. Tan, M.H. Khan* and B. Li* (2016). Impact Mitigation and Protection using Metacomposites with Negative Effective Mass, Conference Proceeding for ASME 2016 International Mechanical Engineering Congress & Exposition (IMECE), 11-17 Nov, Phoenix, Arizona, USA.
  73. B. Li* and K.T. Tan (2016). Energy Absorption and Impact Response of Meta-lattice Truss Core Sandwich Panels, Conference Proceeding for American Society for Composites 31st Technical Conference, 19-21 Sept, Williamsburg, Virginia, USA.
  74. B. Li* and K.T. Tan (2016). Response of Meta-lattice Truss Core Sandwich Structures Subjected to Impulsive Loadings, Conference Proceeding for 11th International Conference on Sandwich Structures, ICSS-11, 20-23 March, Fort Lauderdale, Florida, USA.
  75. K.T. Tan (2015). Impact Damage of Stitched Composites using Statistical Analysis, Conference Proceeding for ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE), 13-19 Nov, Houston, Texas, USA.
  76. K.T. Tan (2015). Dynamic Behavior of Metacomposites, Conference Proceeding for American Society for Composites 30th Technical Conference, 28-30 Sept, Michigan State University, East Lansing, Michigan, USA.
  77. K.T. Tan (2015). A Novel Approach for Impact Mitigation using Mass Negativity Concept of Metacomposites, Conference Proceeding for 20th International Conference on Composite Materials, ICCM-20, 19-24 Jul, Copenhagen, Denmark.
  78. K.T. Tan (2015). Energy Harvesting using Resonating Effect of Internal Resonators in Acoustic Metamaterials, Conference Proceeding for ASME 2015 Applied Mechanics and Materials Conference (McMat), 29 Jun-1 Jul, Seattle, Washington, USA.
  79. H.H. Huang, C.S. Yu and K.T. Tan (2015). Dispersion Characteristics of a Metamaterial Beam with Lateral Resonators, Conference Proceeding for PHONONICS 2015: 3rd International Conference on Phononic Crystals/Metamaterials, Phonon Transport and Phonon Coupling, 31 May-5 Jun, Paris, France.
  80. Pramoda K.P., K.T. Tan, S.L. Chen, H. Gu and Y.W. Leong (2014). Polymer-Wood Composites from Recycled Materials, Conference Proceeding for 8th Singapore International Chemistry Conference, (SICC-8), 14-17 Dec, Singapore.
  81. K.T. Tan and C.T. Sun (2014). Mutual Interaction Effect of Internal Resonators in Acoustic Metamaterials, Conference Proceeding for ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE), 14-20 Nov, Montreal, Canada.
  82. K.T. Tan and C.T. Sun (2014). Metacomposites Protection System against Primary Blast Injury, Conference Proceeding for American Society for Composites 29th Technical Conference, 8-10 Sept, University of California San Diego, La Jolla, California, USA.
  83. T.K. Chuah, L. Zhao, S. Ye, K.T. Tan, P.K. Pallathadka and H.R. Tan (2014). Active Infrared Sensing of Impact Damage in Carbon Fibre Reinforced Polymer, Conference Proceeding for The 12th International Conference on Quantitative InfraRed Thermography, QIRT 2014, 7-11 July, Bordeaux, France.
  84. K.T. Tan, Pramoda K.P., S.L. Chen, H. Gu and Y.W. Leong (2014). Composites using Recycled Materials, Conference Proceeding for 4th Molecular Materials Meeting (M3) Conference, 14-16 Jan, Singapore.
  85. K.T. Tan and C.T. Sun (2013). Interactive Behavior of Internal Resonators in Acoustic Metamaterials under Impact Pulse Loading, Conference Proceeding for 21st International Congress on Acoustics, 2-7 Jun, Montreal, Canada. [Invited Paper, Awarded ICA Young Scientist Grant]
  86. H.H. Huang, K.T. Tan and C.T. Sun (2013). Transmission of Bianisotropic Elastic Metamaterials, Conference Proceeding for PHONONICS 2013: 2nd International Conference on Phononic Crystals/Metamaterials, Phonon Transport and Optomechanics, 2-7 Jun, Sharm El-Sheikh, Egypt. [Invited Talk]
  87. K.T. Tan, H.H. Huang and C.T. Sun (2012). Blast-Wave Impact Resistance of Acoustic Metamaterials, Conference Proceeding for ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE), 9-15 Nov, Houston, Texas, USA.
  88. H.H. Huang, K.T. Tan and C.T. Sun (2012). Unusual Two-Dimensional Wave Motion in an Orthotropic Elastic Metamaterials, Conference Proceeding for ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE), 9-15 Nov, Houston, Texas, USA.
  89. K.T. Tan, A. Yoshimura, N. Watanabe and Y. Iwahori (2012). Impact Damage Progression of Stitched Composites: From Indentation to Penetration, Conference Proceeding for 15th US-Japan Conference on Composite Materials/American Society for Composites 27th Technical Conference, 1-3 Oct, Arlington, Texas, USA.
  90. K.T. Tan, H.H. Huang and C.T. Sun (2012). Negative Effective Mass Density of Acoustic Metamaterial using Dual-Resonator Spring-Mass Model, Conference Proceeding for Metamaterials 2012, 17-20 Sept, St. Petersburg, Russia. [Awarded Travel Grant for Young Researcher]
  91. K.T. Tan, N. Watanabe, A. Yoshimura and Y. Iwahori (2012). Validation of Delamination Reduction Trend for Stitched Composites using Quasi-Static Indentation Test, Conference Proceeding for 15th European Conference on Composite Materials, ECCM-15, 24-28 Jun, Venice, Italy.
  92. K.T. Tan, N. Watanabe, and Y. Iwahori (2011). Fracture Behaviour and Damage Characteristics of Stitched Composites under Impact and Post Impact Loading, Conference Proceeding for 6th International Conference on Fracture of Polymers, Composites and Adhesives, 11-15 Sept, Les Diablerets, Switzerland. [Best Poster Award]
  93. K.T. Tan, N. Watanabe, A. Yoshimura, Y. Iwahori and T. Ishikawa (2011). Progressive Damage in Stitched Composites under Impact Loading, Conference Proceeding for 18th International Conference on Composite Materials, ICCM-18, 21-26 Aug, Jeju Island, Korea. [Invited Paper]
  94. K.T. Tan, N. Watanabe, H. Hoshi, A. Yoshimura, Y. Iwahori and T. Ishikawa (2011). Damage Observation of Stitched Composites under Quasi-Static Indentation Loading, Conference Proceeding for 53rd Japan Structural Conference, 27-29 Jul, Akita, Japan.
  95. K.T. Tan, N. Watanabe, Y. Iwahori and T. Ishikawa (2011). Influence of Stitch Density and Stitch Thread Thickness on Compression After Impact Strength of Stitched Composites, Conference Proceeding for 16th International Conference on Composite Structures, ICCS-16, 28-30 Jun, Porto, Portugal.
  96. K.T. Tan, N. Watanabe, H. Hoshi, Y. Iwahori and T. Ishikawa (2011). Enhancement of Compression After Impact Strength Using Through-Thickness Stitching, Conference Proceeding for 2nd Japan Conference on Composite Materials, JCCM-2, 16-18 Mar, Tokyo, Japan.
  97. K.T. Tan, N. Watanabe, H. Hoshi, Y. Iwahori and T. Ishikawa (2010). Compression After Impact Performance of Vectran-Stitched Composites, Conference Proceeding for 7th Asian-Australasian Conference on Composite Materials, ACCM-7, 15-18 Nov, Taipei, Taiwan.
  98. K.T. Tan, N. Watanabe, H. Hoshi and Y. Iwahori (2010). Prediction of Delamination Damage in Stitched Composites Due to Impact Loading, Conference Proceeding for 35th Composite Materials Symposium, 13-14 Oct, Hiroshima, Japan. [Presented in Japanese]
  99. K.T. Tan, N. Watanabe, H. Hoshi and Y. Iwahori (2010). Impact-Induced Delamination Suppression in Laminated Composites using Through-Thickness Stitching, Conference Proceeding for 14th US-Japan Conference on Composite Materials/American Society for Composites 25th Technical Conference, 20-23 Sept, Dayton, Ohio, USA.
  100. K.T. Tan, N. Watanabe, H. Hoshi and Y. Iwahori (2010). Effectiveness of Stitching in Damage Tolerance of Laminated Composites, Conference Proceeding for 9th China-Japan Joint Conference on Composite Materials, CJJCC-9, 6-9 Sept, Hohhot, Inner Mongolia, China.
  101. K.T. Tan, N. Watanabe, H. Hoshi and Y. Iwahori (2010). Damage Response and Mechanisms of Stitched Composites Under Impact Loading, Conference Proceeding for 14th European Conference on Composite Materials, ECCM-14, 7-10 Jun, Budapest, Hungary.
  102. K.T. Tan, N. Watanabe, H. Hoshi and Y. Iwahori (2010). Influence of Stitch Density and Stitch Thread Thickness on Low Velocity Impact Response of Vectran-Stitched Composites, Conference Proceeding for 1st Japan Conference on Composite Materials, JCCM-1, 9-11 Mar, Kyoto, Japan.
  103. K.T. Tan, N. Watanabe, H. Hoshi and Y. Iwahori (2009). Application of Vectran-Stitched Composites in Aircraft Structures, Conference Proceeding for 2nd International Seminar on System Design, ISSD2009, 4-6 Nov, Tokyo, Japan.
  104. K.T. Tan, N. Watanabe, H. Hoshi and Y. Iwahori (2009). Low Velocity Impact Damage Response of Vectran-Stitched Composites, Conference Proceeding for 7th Japan-Korea Joint Symposium on Composite Materials, 24-26 Sept, Kanazawa, Japan.
  105. K.T. Tan, N. Watanabe, M. Sano, M. Takase, Y. Iwahori and H. Hoshi (2009). Material Selection of Z-fibre in Stitched Composites – Experimental and Analytical Comparison Approach, Conference Proceeding for 17th International Conference on Composite Materials, ICCM-17, 27-31 Jul, Edinburgh, Scotland.
  106. K.T. Tan and N. Watanabe (2009). Computational Modeling of Mode I Fracture Toughness in Vectran-Stitched Composites, Conference Proceeding for JSCM Spring Conference, 18-19 May, Tokyo, Japan.